Fix Your Washing Machine Not Draining Water Or Spinning Properly

If your washing machine is not draining water or spinning properly, there are several things you can do to get it to work again. First, you should check for a clog in the drain hose or drain pipe. A kink can also prevent the water from draining from the top-loading washer.

What causes washing machine not to drain and spin?

When a washing machine does not drain and spin, it can cause a lot of problems. Not only does it leave your clothes dirty, but it can also make a big mess. Fortunately, most of these problems can be fixed easily. Here are a few possible causes.

A broken lid switch is the most common cause of this problem. This mechanism prevents the water from draining from the washer when the lid is left open. This switch is an extremely delicate part of washing machine equipment and often breaks. To diagnose the problem, you need to remove the panel and check the belts. If they are stretched or broken, you may need to replace them.

Another common cause is a clogged drain pump. If your drain pump is clogged with lint, your washing machine won’t be able to drain properly. Occasionally, the outlet pipe can become stuck. Coins or hairpins can also get caught in the outlet pipe, blocking the water flow. To remove the clog, you can try using a drain snake tool to remove any debris that is blocking the drain hose.

4 Reasons Your Washing Machine Won’t Drain or Spin

Your washing machine may not spin or drain as it should, and there are several reasons why this is happening. For starters, the drain pump may be clogged with a foreign object. If this is the case, you’ll probably hear a humming sound when the washer is full. Another possible cause of the problem is that the belt has become worn. If this is the case, a repair technician will need to replace it.

Another possible cause of the problem may be a clogged coin trap. Fortunately, most coin traps have an easy access panel so you can clean it out. If this doesn’t solve the problem, you may have a problem with your washer’s water level control. If the plastic tube has become clogged, you may need to clean it with vinegar. In severe cases, you may need to replace the water level valve.

If the drain hose is blocked or frozen, this could also be a cause. A clogged pump will prevent the water from draining. In some cases, clothing may have been trapped in the drain pump. If the pump can’t drain, you’ll need to manually drain the washing machine.

Troubleshoot top-load washer won’t drain or spin

If your top-load washer won’t spin or drain properly, you need to troubleshoot the problem. One of the most common causes is a clog in the drain pipes. To clear these pipes, use a drain snake. Also, you can try pouring water down the drain line to check for a clog.

First, you must remove the drain hose from the washer. You can do this by untwisting it and looking for kinks. Another cause could be a foreign object clogged inside the drain hose. To remove foreign objects, clean the drain hose with hot water and detergent. Once the drain hose is clean, reattach it to the drain pipe. Then, reinstall the power and water to the washer.

If the drain hose is not allowing water to drain, try flushing the machine by placing the hose end in a bucket. If this does not fix the problem, you may need to call a plumber to repair the machine.

Check for clogs in the drain hose and drain pipe

If your washing machine isn’t draining water, you might need to check the hose and drain pipe for kinks or clogs. If you see a kink, you can try to straighten it. If you can’t reach the clog, you can try emptying the water from the machine into a bucket.

The clog may be at the surface of the drain pipe and hose, but it may also be further down the pipe. If you can’t reach the bottom of the drain pipe, use a drain snake to clear it. These snakes are available at your local hardware store and cost about $25. To avoid contaminating your hands, use latex gloves when cleaning the pipes.

Another common cause of washing machine not draining water is a clogged drain pump. It is designed to drain the water from the washer. It can become clogged if it is not positioned properly or is worn out. It may also need to be replaced if it is old or heavily used. However, if the hose and drain pipe are clear and there’s no clog, your machine’s problem may be the drain pump.

How do you clean a top load washing machine filter?

If you are experiencing trouble with the water draining from your top-load washing machine, you may need to clean the filter. The filters can be found near the water pump and at the end of the drainage hose. To clean the filter, you need to remove the outer housing of the washing machine and unscrew the hose. The removable water pump filter should be soaked in hot water and liquid dishwashing detergent for about 10 minutes to remove any residue from the water hose and drains. The non-removable filters can be cleaned by scrubbing them with a paper towel or a small brush.

A soft-bristle brush can help you remove the debris that has clogged the filter. After the filter has been cleaned, you can rinse it out by running the washing machine on a short cycle.

Check the washing machine timer

If your washing machine is not draining water, one of the easiest fixes is to check the timer. Check whether the timer is working properly by disabling the machine’s power source. To do this, you’ll need to remove the control panel and rear panel. With the washer off, connect a multi-meter to the timer. Press the probes against the motor contacts and make sure continuity is present. If there’s no continuity, it’s likely the timer is defective.

The timer is a circuit that controls the functions of your washing machine. Make sure it’s set to start and stop when the lid is closed. The timer will have a series of electrical contacts and should line up with graphics on the control panel. If it doesn’t, try advancing the timer.

Another cause of not draining water from a washing machine is a faulty motor control board. A faulty motor control board prevents the tub from spinning. Check the motor control board to see if the power is getting to it. It should also be checked for any signs of burning or a shorted component.

Test the washing machine lid switch

If your washing machine does not drain water properly, it may be due to a faulty lid switch. The lid switch is a small plastic switch under the lid or door of your washer. It should make a clicking noise when pressed. If it does not, you will need to replace the lid switch. Another possible cause is a broken or damaged belt.

To check if this is the cause of the problem, unplug the washing machine and open the top control panel. Locate the lid switch, which is usually located near the top right corner of the washer. Then, test the switch by using a multimeter to determine whether it is broken or not.

If the lid switch is defective, you will need to replace the lid switch assembly. This is the part that prevents the motor circuit from running when the lid is open. Alternatively, you can manually activate the lid switch lever to check if it has become damaged.

Check out all the major cities we service in Cobb County Community Service Area:

Marietta, Macland, Westoak, Noonday, Smyrna, Kennesaw, Sandy Plains, East Cobb, Powers Park, Chattahoochee Plantation, Blackwells, Cumberland, Acworth, Lost Mountain, Fair Oaks, Powder Springs, Clarkdale Park, Mars Hill, Vinings


Tap to CALL